TESTING SERVICES

Construction Material Testing Services in Chennai

Q: Is your laboratory NABL accredited?

Yes, our laboratory provides NABL-accredited testing where applicable and follows relevant IS-standard testing procedures for reliable and accurate results.

Q: Why choose Falcon Laboratory for Construction Materials Testing Chennai?

Falcon Laboratory provides reliable Construction Materials Testing Chennai services with experienced engineers, modern laboratory equipment, accurate reports, and technical support for quality construction.

Reliable Construction Materials Testing Chennai, backed by NABL-accredited laboratories, IS-standard testing procedures, fast turnaround times, and accurate, detailed reports.

Construction Materials Testing

Comprehensive Construction Materials Testing Chennai services to verify the strength, durability, and compliance of building materials using NABL-accredited laboratory testing and IS-standard procedures.

Tests We Perform

Coarse Aggregate Testing

IS 2386 (Parts 1-8)

Sieve analysis, specific gravity, water absorption, flakiness index, elongation index, crushing value, impact value, abrasion, soundness.

Sample: 25 kg TAT: 2–3 days

Fine Aggregate Testing

IS 2386 (Parts 1-8)

Sieve analysis, fineness modulus, silt content, specific gravity, water absorption, bulk density, bulking of sand, deleterious materials.

Sample: 15 kg TAT: 2–3 days

Autoclaved Aerated Concrete (AAC) Blocks

IS 2185 (Part 3):1984

Density, compressive strength, drying shrinkage, moisture content, water absorption, dimensional tolerance.

Sample: 6 blocks TAT: 5–7 days

Paver Blocks

IS 15658:2021

Compressive strength, flexural strength, water absorption, abrasion resistance, dimensional accuracy.

Sample: 10 blocks TAT: 5–7 days

Kerb Stone Testing

IS 5758:1984

Compressive strength, water absorption, dimensional tolerance, visual inspection.

Sample: 5 kerb stones TAT: 5–7 days

Bricks & Precast Concrete Blocks

IS 3495 (Bricks), IS 2185 (Concrete Blocks)

Compressive strength, water absorption, efflorescence, dimensions, density.

Sample: 10 units TAT: 5–7 days

Pulverized Fuel Ash-Lime Bricks (Fly Ash Bricks)

IS 12894:2002

Compressive strength, water absorption, dry density, dimensional tolerance.

Sample: 10 bricks TAT: 5–7 days

Burnt Clay Hollow Bricks for Walls & Partitions

IS 3952:1988

Compressive strength, water absorption, dimensions, wall thickness, visual quality.

Sample: 10 bricks TAT: 5–7 days

Fresh Concrete Testing

IS 1199, IS 7320, IS 9103

Slump, compaction factor, Vee-Bee, flow, air content, temperature, density.

Sample: Fresh concrete (20–30 L) TAT: Same day

Hardened Concrete Testing

IS 516 (Part 1 & Series)

Compressive strength, flexural strength, split tensile strength, density, water absorption, modulus of elasticity.

Sample: 3 cubes/cylinders per age TAT: 3–28 days

Cement (OPC, PPC, PSC)

IS 4031 (Parts 1–15), Relevant Product Standards (IS 269, IS 1489, IS 455)

Fineness, consistency, setting time, soundness, compressive strength, specific gravity.

Sample: 5 kg TAT: 3–7 days

Fly Ash Testing

IS 1727, IS 3812 (Part 1)

Fineness, lime reactivity, moisture, loss on ignition, chemical composition, strength activity index.

Sample: 5 kg TAT: 5–7 days

Silica Fume Testing

IS 15388:2003

SiO₂ content, moisture, loss on ignition, specific surface area, bulk density, strength activity index.

Sample: 2 kg TAT: 5–7 days

Ground Granulated Blast Furnace Slag (GGBS)

IS 16714:2018

Fineness, glass content, moisture, chemical composition, compressive strength activity.

Sample: 5 kg TAT: 5–7 days

Concrete Admixtures

IS 9103:1999

Relative density, pH, chloride content, air entrainment, setting time, compressive strength performance.

Sample: 2 litres (liquid) / 2 kg (powder) TAT: 5–7 days

Granular Sub-Base (GSB)

MoRTH Section 400, IS 2386, IS 2720 Series

Gradation, Atterberg limits, CBR, compaction, moisture-density relationship, aggregate strength.

Sample: 50 kg TAT: 4–6 days

Wet Mix Macadam (WMM)

MoRTH Section 406, IS 2386, IS 2720 Series

Gradation, compaction, CBR, moisture-density relationship, aggregate quality tests.

Sample: 50 kg TAT: 4–6 days

Bitumen Testing

IS 1201–1220 Series, IS 15462, ASTM D5/D36/D113 (where applicable)

Penetration, softening point, ductility, viscosity, flash & fire point, specific gravity, stripping value.

Sample: 5 kg TAT: 3–5 days

Choose Falcon Laboratory for reliable Construction Materials Testing Chennai services backed by experienced engineers, NABL-accredited laboratory facilities, IS-standard testing procedures, and detailed technical reports. We help builders, contractors, consultants, and industries maintain quality, safety, and compliance at every stage of construction.

Construction Materials Testing verifies the quality, strength, and durability of materials such as concrete, cement, steel, aggregates, and bricks to ensure they meet IS standards.

We test concrete, cement, steel, aggregates, bricks, AAC blocks, bitumen, paver blocks, tiles, and other construction materials used in civil engineering projects.

Yes, our laboratory provides NABL-accredited testing (where applicable) and follows relevant IS-standard testing procedures for reliable results.

Testing time varies by material and test type. Most reports are delivered within the specified turnaround time with accurate technical findings.

We provide reliable Construction Materials Testing Chennai services with experienced engineers, modern laboratory equipment, accurate reports, and technical support for quality construction.

Need Construction Materials Testing for Your Project?

Partner with our experienced engineers for reliable Construction Materials Testing Chennai services. Get accurate results, IS-standard testing, fast turnaround, and a customized quotation for your project.

Request a Quote